CNC ROUTER Manufacturer posted on LinkedIn (2024)

Apex 2024 Hot-selling CNC Router Marble Stone CNC Granite Stone Engraving Machine Natural Stone Cutting MachineToday I will share with you some knowledge about the precautions, maintenance measures, etc. of the stone machineMaintenance measures for stone machines:1. The continuous operation time of the engraving machine is less than 10 hours a day, ensuring the cleanliness of the cooling water and the normal operation of the water pump. The water-cooled spindle motor must not be short of water. The cooling water should be replaced regularly to prevent the water temperature from being too high.2. After each use of the engraving machine, pay attention to cleaning. Be sure to clean the dust on the platform and the transmission system, and regularly (weekly) lubricate and refuel the transmission system (X.Y.Z three axes).3. If the engraving machine is not used for a long time, it should be regularly (weekly) refueled and emptied to ensure the flexibility of the transmission system.4. The engraving machine regularly (according to the use situation) cleans the dust in the electrical box and checks whether the terminal screws are loose to ensure the safe and reliable use of the circuit.5. The engraving machine regularly (according to the use situation) checks whether the screws of various parts of the machine are loose, etc.Regular maintenance of the stone engraving machine can extend its life and reduce the frequency of failures.WhatsApp: +86 13658633650

1

Apex 2024 Hot Sale 3D Stone CNC Router Marble Granite Carving CNC Stone Cutting MachineToday I will share with you some knowledge about the precautions, maintenance measures, etc. of the stone machinePrecautions for stone machine:6. Correct use of stone cutting machineThe stone cutting machine is an industrial manufacturing equipment and should be operated in strict accordance with the operating procedures when used. During use, attention should be paid to safety protection to avoid operating errors and children's approach. At the same time, the operator should correctly select the type and size of the cutting knife, and adjust the depth and angle of the cutting knife according to the actual situation to achieve the best cutting effect.Correct maintenance and use of the stone cutting machine can greatly extend its service life, improve work efficiency and safety. Therefore, when using the stone cutting machine, you should fully understand the knowledge of its maintenance and maintenance to ensure that the machine can run stably and bring greater help to our work.WhatsApp: +86 13658633650

Apex 2024 Hot Sale 3D Stone CNC Router Marble Granite Carving CNC Stone Cutting MachineToday I will share with you some knowledge about the precautions, maintenance measures, etc. of the stone machinePrecautions for stone machine:1. Clean the stone cutting machine regularlyAfter the stone cutting machine has been used for a period of time, a large amount of stone chips and dust will be deposited. If it is not cleaned in time, it will damage the machine parts and reduce its working efficiency. Therefore, we should clean the machine after work every day. Use a clean brush or vacuum cleaner to remove the dust and cutting chips on the surface of the machine, exhaust port, cutting head and other parts, and clean the impurities and dirt in the water tank.2. Check the power supply of the stone cutting machineThe stable power supply of the stone cutting machine is an important condition to ensure its normal operation. Therefore, check the power supply and wires of the machine regularly to ensure that the line is clean and unobstructed. At the same time, check the operation of components such as the power switch and fuse to ensure their normal operation.3. Refueling and lubricationWhen the parts of the stone cutting machine are working, they will generate a lot of friction. One of its protection measures is refueling and lubrication. Before the machine is operated, the lubrication of each part should be checked to confirm that all parts are adequately lubricated. Especially after the work is finished, all moving parts of the machine should be wiped clean, and then refueled and lubricated to ensure its smooth operation.4. Regular maintenance of the cutting knife of the stone cutting machineThe cutting knife of the stone cutting machine is the most important part. If the cutting knife is insufficient, it will lead to low cutting efficiency and even affect the cutting quality. Therefore, we should clean and check the cutting knife regularly, replace the worn and damaged cutting knife in time, and apply anti-friction oil before cutting to increase the life of the cutting knife.5. Pay attention to the use environment of the stone cutting machineThe use environment of the stone cutting machine should ensure dryness, ventilation, and suitable temperature, and avoid working in a humid, high temperature or low temperature environment. If the use environment is too extreme, it is easy to damage the machine and even affect the safety of the operator. When running or stopping, the machine should be kept away from shock and vibration as much as possible.WhatsApp: +86 13658633650

Apex 2024 Very Competitive Price High Speed Auto Feed CNC Digital Oscillating Knife Fabric Textile Cloth Garment Clothing Cutting MachineSafety tips for vibration knife cutting machine1. When the vibration knife cutting machine is running, do not put your hands or head close to the running beam or machine head to avoid accidents. Even if the machine is stopped, you should stay away because it will suddenly start to move when receiving data; (Our machine has a safety sensor. As long as the worker's body or arms are within a certain range, the machine will stop automatically. This is our patented technology, but you still need to pay attention to safety)2. Make sure the grounding device is good; do not connect the cutting machine to parts without rated power;3. If the machine smokes, emits odor or does not function properly, do not continue to use it. Turn off the power and unplug the power cord from the power socket;4. Do not use or store the cutting machine in exposed, humid, vibrating, noisy, water containers, or liquid places;5. Do not disassemble, repair or modify the machine without authorization;6. All metal objects must not be attached to the power cord and socket;7. If you leave the machine for a long time, turn off the power to prevent non-professional operation.WhatsApp：+86 13658633650